Introduction of correct use of stainless steel bearings

Source:shengfe Date:2018-07-31 00:25

Introduction of correct use of stainless steel bearings
 

In addition to the quality of stainless steel bearings, is also a very precise part, in general, as long as the correct use of stainless steel bearings, usually can be used to reach the fatigue life. But there will be accidents too early to damage, and can not be used. This early damage is relative to the fatigue life, which is called the quality limit of failure or accident, which is due to the inattention of installation, use and lubrication, the foreign objects invaded from the outside, and the insufficient research on the heat effect of the shaft and the shell.
 
Stainless steel bearing
The damage state of common stainless steel bearings, such as the ring of roller bearing and the sticking of the side, can be considered as the reasons for the lack of lubricants, unfit, defects for the structure of the oil, the invasion of foreign objects, the error of bearing installation, and the large deflection of the shaft. Foreign bodies and improper lubrication are the main reasons for the damage of stainless steel bearings. If the operation is improper, it will not achieve the desired effect, and it will easily damage the stainless steel bearings.
 
When the stainless steel bearing is malfunction, if you know the use of the stainless steel bearing machinery, the use conditions, the structure around the high temperature bearing, and understand the situation before and after the accident, combined with the damage state of the bearing and several reasons, it can prevent the similar accidents from happening again. So we should use stainless steel bearings more. Attention should be paid to prevent bearing damage and affect work.
 
In addition, it puts forward a few points that are easy to ignore:
 
One, dust, even if the naked eye can not see the fine dust soil into the bearing, will also increase the bearing wear, vibration and noise.Two, sweat, directly hand picked stainless steel bearings, to fully wash the sweat on hand, it is best to wear professional gloves operation.Three, store, in rainy season and summer, special attention should be paid to preservation methods so as not to rust.
stainless steel bearings
stainless steel bearings